NAME
qwx —
Qualcomm IEEE 802.11a/ac/ax/b/g/n
wireless network device
SYNOPSIS
qwx* at pci?
DESCRIPTION
The qwx driver provides support for
Qualcomm Technologies QCNFA765 802.11ax devices.
These are the modes the qwx driver can
operate in:
- BSS mode
- Also known as infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default.
The qwx driver can be configured to use
Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA1 and WPA2).
WPA2 is currently the most secure encryption standard for wireless networks
supported by OpenBSD. It is strongly recommended
that neither WEP nor WPA1 are used as the sole mechanism to secure wireless
communication, due to serious weaknesses. WPA1 is disabled by default and
may be enabled using the option "wpaprotos
wpa1,wpa2". For standard WPA networks which use
pre-shared keys (PSK), keys are configured using the
"wpakey" option. WPA-Enterprise networks
require use of the wpa_supplicant package. The qwx
driver offloads both encryption and decryption of unicast data frames to the
hardware for the CCMP cipher.
The qwx driver can be configured at
runtime with ifconfig(8)
or on boot with hostname.if(5).
FILES
The driver needs the following firmware files, which are loaded when an interface is brought up:
- /etc/firmware/qwx-wcn6855-hw2.0-amss
- /etc/firmware/qwx-wcn6855-hw2.0-board-2
- /etc/firmware/qwx-wcn6855-hw2.0-m3
- /etc/firmware/qwx-wcn6855-hw2.0-regdb
- /etc/firmware/qwx-wcn6855-hw2.1-amss
- /etc/firmware/qwx-wcn6855-hw2.1-board-2
- /etc/firmware/qwx-wcn6855-hw2.1-m3
- /etc/firmware/qwx-wcn6855-hw2.1-regdb
These firmware files are not free because Qualcomm refuses to grant distribution rights without contractual obligations. As a result, even though OpenBSD includes the driver, the firmware files cannot be included and users have to download these files on their own.
A prepackaged version of the firmware can be installed using fw_update(8).
EXAMPLES
The following example scans for available networks:
# ifconfig qwx0 scanThe following hostname.if(5) example configures qwx0 to join network “mynwid”, using WPA key “mywpakey”, obtaining an IP address using DHCP:
join mynwid wpakey mywpakey inet autoconf
SEE ALSO
arp(4), ifmedia(4), intro(4), netintro(4), pci(4), hostname.if(5), ifconfig(8)
HISTORY
The qwx driver first appeared in
OpenBSD 7.5.
CAVEATS
The qwx driver does not support any of the
802.11ac and 802.11ax capabilities offered by the hardware.
BUGS
Broadcast and Multicast frames are only received on networks which do not use encryption or which use WPA. This prevents ARP and IPv6 from working correctly on networks which use WEP encryption.